SBS Modified Bitumen Waterproof Membrane For Civil Buildings
Modified Bitumen Waterproof Membrane Description
This product is made of styrene-butadiene-styrene (SBS) block copolymer modified asphalt.
This product is made of styrene-butadiene-styrene (SBS) block copolymer modified asphalt as the coating layer, and the modified asphalt is applied to the polyester tire base and covered with polyethylene film (PE), fine sand (S), sand, sand, and sand.
Polyethylene membrane (PE), fine sand (S), mineral granules (M) made of sheet waterproofing membrane.
Suitable for roofing and underground waterproofing projects of industrial and civil buildings.
| Item | Standard Requirements |
| Model | Type 1, Type II |
| Coil length | 10m,7.5m |
| Coil width | 1m |
| Coil thickness | 3mm,4mm,5mm |
| Coil area | 10m,7.5m |
| Upper surface barrier | Polyethylene film(PE),Fine sand(S),Mineral granules(M) |
| Lower surface isolation material | Polyethylene film(PE) |
Modified Bitumen Waterproof Membrane Features
1. High tensile strength and high elongation can effectively adapt to the contraction and deformation of the grass-roots level and the open
Cracking;
2. Mineral granule type coil has excellent aging resistance and anti-ultraviolet performance;
3. Excellent high and low temperature resistance;
4. hot-melt construction, fire baking easy oil, work method is mature, reliable waterproofing effect;
5. polyester tire base as a reinforcing layer, effectively enhance the mechanical strength of the waterproofing layer, puncture resistance, tear resistance and other properties.
Puncture resistance, tear resistance and other properties.
Product Tags:
|
|
Waterproof SBS Modified Bituminous Membrane For Civil Buildings Images
|
